I really need to design this page better :( but i do not know how to talk to the computer:(

ya this is about a lesson most people get taught before preschool. of course just because you are taught something and know it does not mean you will follow those rules.

so my black light was not working, it was plugged in just it would not light up. i tried jiggling the wire nothing...

so i decided that since jiggling didn't work maybe i should pull the wire^^ ya fun

so after a few sparks and a flashy light show the wire came out and to my disappointment the black light still was not on

ya the duck tape that was holding the wire in was fried, but it gave it a cool metallic black look.

so then after some time playing with the wire still plugged into the wall.... i decided that i did not want to die just yet and unplugged it from the wall.

I placed the wire ends back into their rite full place in the black light put more duck tape on them and made sure the wire was nice and tight so as 1 it would not become loss and 2 i would not decide to pull it out again, no mater how much fun it was the first time.

and finally i plugged the wire back into the wall and the black light still works^^ so i is happy and able to see in my room once more^^

Wow... OK I have wanted to build a deck on my roof for some time now, and its finally warm enough to get on my roof. so i went up their got the measurements and decided to start designing it. i saw Google had a 3D modeling program last night so i decided i would give it a try. i start off not to hard just like a 2D model, just giving the blocks a little depth... ya that lasted for about 10 minuets.trying to add a slant to your rood is not so easy when you added 30 extra lines in your design 20 steps before! it also seems to be impossible to get all the same measurements on every post in the design, not to mention any post that are placed on the sloped roof become sloped them selves. while their is an eraser tool it does not work the same as a saw, actualy i do not even know how it works because it does not seem to do any thing(not sure if i am using it wrong or what). the worst part of it all is trying to keep your point of focus, i keep moving around zooming in, panning all directions, zoom some more, then rotate a little more and repeat for about 45 seconds till you get the camera where you want it. this constant movement actually has left me very confused and disoriented.

all in all it is a nice program, just i am new to 3D design. I must say though 3D modeling is not so easy, I think this might be my last 3D model for some time.